SOLVENT FOR PREPARING SURFACES ON METAL BEFORE COATING
DISSOLUTION AND CLEANING OF INKS, VARNISHES, PAINTS
TECHNICAL SOLVENT WITH A VERY HIGH SOLVENT POWER AND VERY HIGH EVAPORATION RATE
|
KEY FIGURES |
FLASH POINT |
EVAPORATION RATE |
DEGREASING POWER KB index |
|
BIOSANE ULTRAMAX |
27°C |
9'20" |
>150 |
2 FUNCTIONS
ADVANCED DEGREASING AND REACTIVATION OF SURFACES
PRINT COATING SOLVENT AND CLEANER
- Cleans or degreases substrates, all metals or their alloys, before coating with inks, varnishes or paints. Reactivates surfaces without creating oxidation or corrosion. Can also be used on OMC or CC composites (organic or carbon/carbon matrix).
- Enables cleaning of the application equipment used for these same coatings. Cleans off application defects, such as runs. Removes polyvinyl or nitrocellulose bonding primers.
BIOSANE ULTRAMAX is guaranteed free of chlorinated solvents, ketones or aromatics, and phosphoric acid.
In line with CLP, no ‘danger’ pictograms as regards toxicity to operators.
PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
BULK VALUES |
AEROSOL VALUES |
UNITS |
|
Appearance |
Visual |
Clear |
Clear |
- |
|
Colour |
Visual |
Colourless |
Colourless |
- |
|
Odour |
Olfactory |
Properties |
Properties |
- |
|
Density at 25°C |
NF EN ISO 12185 |
898 |
898 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4050 |
1.4050 |
- |
|
Freezing point |
ISO 3016 |
-50 |
-50 |
°C |
|
Boiling – Distillation |
ISO 3405 |
120-165 |
120-165 |
°C |
|
Vapour pressure at 20°C |
ASTM D 5188 EN 13016.1.2.3 |
1.2 |
1.2 |
kPa |
|
Solubility in water |
- |
0.01 |
0.01 |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.1 |
1.1 |
mm²/s |
|
Acid value |
EN 14104 |
<1 |
<1 |
mg(KOH)/g |
|
Iodine value |
NF EN 14111 |
0 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<0.1 |
<0.1 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
0 |
% |
|
PERFORMANCE CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
>150 |
>150 |
- |
|
Evaporation rate |
- |
9'20" |
9'20" |
minutes |
|
Surface tension at 20°C |
ISO 6295 |
27.5 |
27.5 |
Dynes/cm |
|
Copper blade corrosion 100h at 40°C |
ISO 2160 |
1a |
1a |
Rating |
|
FIRE SAFETY PROPERTIES |
||||
|
PROPERTIES |
STANDARDS |
VALUES |
VALUES |
UNITS |
|
Flash point (vacuum) |
NF EN 22719 |
27 |
27 |
°C |
|
Self-ignition point |
ASTM E 659 |
>230 |
>230 |
°C |
|
Lower explosive limit |
NF EN 1839 |
1.2 |
1.2 |
% (by volume) |
|
Upper explosive limit |
NF EN 1839 |
13.7 |
13.7 |
% (by volume) |
|
TOXICOLOGICAL PROPERTIES |
|
|
|
|
|
PROPERTIES |
STANDARDS |
VALUES |
VALUES |
UNITS |
|
CMR, irritating and corrosive substance content |
CLP Regulation |
0 |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
0 |
% |
|
ENVIRONMENTAL PROPERTIES |
||||
|
PROPERTIES |
STANDARDS |
VALUES |
VALUES |
UNITS |
|
Water endangering |
WGK Germany |
1 Not water endangering |
1 Not water endangering |
class |
|
Primary biodegradability CEC 21 days at 25°C |
L 33 T82 |
>70 |
>70 |
% |
|
Readily biodegradable OECD 301 A over 28 days Disappearance of the COD |
ISO 7827 |
>70 |
>70 |
% |
PRESENTATIONS
|
|
|
|
Performance tests under UV
wavelength under the lamp: 365-400 nm
Cleaning solvent for all families of
inks and varnishes, whether solvent or vegetable-based
